Spring Hill Concrete Pro logo
Mixer truck pouring a new concrete slab beside a house

Slabs · Murfreesboro, TN

Concrete Slab Contractor in Murfreesboro, TN

Concrete Slabs for Murfreesboro homes and businesses. Call or fill out the form for a free quote.

4.514 reviews on Networx

Murfreesboro, Rutherford County and every town within 30 miles of Spring Hill

Swipe for more reviews →

Get a Free Slab Quote in Murfreesboro

Free quotes. Fill out the form or call, and we'll get right back to you.

  • Free quotes
  • Licensed & insured
  • 20+ years experience
  • Residential & commercial

Fill out the form below to get your free quote 👇

Rather talk? Call us now: (615) 671-4246

Concrete Slabs · Murfreesboro

Concrete Slabs for Murfreesboro properties

Murfreesboro homeowners call us for shop, barn, garage and monolithic slabs, formed and finished. We're a licensed, insured crew with twenty-plus years of experience, and every Murfreesboro job starts with a free quote.

In the older neighborhoods here, a lot of the work is replacing original driveways, walks and patios that have cracked, heaved or sunk, often between mature trees and in tight spaces.

A Spring Hill customer wrote about their backyard patio: “Back yard patio. Not easy to access but he did the job well. Clean up was done immediately. I will recommend him, for sure. He answered all my questions and the job was done the next day, as promised.”

Broom-finished concrete still in its wood forms
Our crew's work

What's included

Concrete Slabs we do in Murfreesboro

  • 01

    Monolithic slabs

    The floor and its thickened perimeter footing poured together in one pour, a common choice for garages, shops and small buildings.

  • 02

    Shop and pole barn floors

    Large slabs for metal buildings and pole barns, with room for equipment, workbenches and floor drains where you want them.

  • 03

    Slab foundations and additions

    Slab-on-grade foundations for additions, sunrooms and outbuildings, set to tie into the existing house at the right height.

  • 04

    Vapor barrier and reinforcement

    Vapor barrier under interior slabs to keep ground moisture out, and rebar or wire set on supports so it ends up inside the concrete, not under it.

  • 05

    Anchor bolts and embeds

    Anchor bolts, hold-downs and plumbing sleeves set where your building plans or kit supplier calls for them.

  • 06

    Finish to suit the use

    A smooth steel-trowel finish for shop and garage floors, a broom finish for outdoor slabs, and joints cut early to control cracking.

Rutherford County

Concrete Slabs around Murfreesboro

We work all over Murfreesboro — near Old Fort Park, Cannonsburgh Pioneer Village and Stones River Mall and out by The Avenue Murfreesboro and Todds Lake — and throughout Rutherford County.

Murfreesboro is the Rutherford County seat and home to Middle Tennessee State University, at the east edge of our service area. Murfreesboro is about 29 miles east of Spring Hill, well inside our 30-mile service area.

Concrete in Middle Tennessee has to handle clay soil that swells when it's wet and shrinks in a dry August, limestone that's often only a few feet down, freeze-thaw winter nights and heavy spring rain. A slab holds up when it sits on a compacted stone base, has steel where it needs it, sheds water away from the house and has joints cut where cracks are meant to go.

Real work · not stock photos

Our concrete slabs jobs

Photos from our own concrete slabs jobs around Middle Tennessee.

  • Mixer truck pouring a new concrete slab beside a house
  • Broom-finished concrete still in its wood forms
  • Large fresh concrete slab with the crew's finishing tools on it
  • Two crew members bull-floating a large concrete slab
  • Crew finishing a new concrete slab at the edge of a field

How it works

How your Murfreesboro slab job works

  1. 1

    Free on-site quote

    We look at the site, your building plans and truck access, then give you a written quote for free. Customers mention how quickly the estimate comes back.

  2. 2

    Excavation and footings

    We clear and grade the pad, dig footings down to firm soil and compact the stone base.

  3. 3

    Forms, barrier and steel

    We set forms square and level, lay vapor barrier, place steel, set anchors and sleeves, and get any required inspection before the pour.

  4. 4

    Pour and finish

    The trucks pour, our crew screeds, bull-floats and finishes the slab, cuts joints and cleans up so your builder can start.

Customer reviews

What our customers say

  • “George contacted us to provide a quote quickly. He was very responsive throughout the permit and scheduling process. The work was completed on time and to our complete satisfaction. I would feel completely comfortable recommending him to a friend.”

    Randy · Chapel Hill, TN

    Garage pad and patio · Networx review

  • “Back yard patio. Not easy to access but he did the job well. Clean up was done immediately. I will recommend him, for sure. He answered all my questions and the job was done the next day, as promised.”

    Ms. · Spring Hill, TN

    Backyard patio · Networx review

  • “George and his crew arrived early and was a pleasure Interacting throughout the day with them. George and his crew worked quickly and efficiently until job was finished . Very good quality work. A good price and a respectful crew. I will use George again for all my concrete needs. Thank you GEORGE !”

    Dean · Murfreesboro, TN

    Concrete patio, walks & steps · Networx review

  • “Doing business with George and his crew was a good experience and finished job on time scheduled.”

    Bill · Hohenwald, TN

    Concrete · Networx review

  • “Great Job. Very reasonably priced. Would highly recommend this man of God.”

    Mike · Gallatin, TN

    Concrete driveway · Networx review

  • “Very nicely done. He was able to do my job the day after I talked to him He went the extra mile to make sure I was happy with his work”

    Martha · Franklin, TN

    Driveway grading · Networx review

Questions

Concrete Slabs in Murfreesboro: FAQs

Do you do concrete slabs in Murfreesboro, TN?

Yes. Murfreesboro is about 29 miles east of Spring Hill, well inside our 30-mile service area. We handle shop, barn, garage and monolithic slabs, formed and finished there, and the quote is free.

Do I need a permit for concrete slabs in Murfreesboro?

It depends on the project. When one is needed, we pull the permit from the City of Murfreesboro's building department and build to whatever the permit and inspection require.

Can you have the slab ready for my building kit or framer?

Yes. Send us your plans or the kit supplier's foundation drawing and we set the slab size, anchor bolt layout and any thickened areas to match. A slab that is square and level makes every wall and door that sits on it go in easier.

How do you handle clay and rock when pouring a slab here?

We plan for both. Middle Tennessee clay swells and shrinks with moisture, so we strip soft soil, build up a compacted stone base and dig footings down to firm ground. Limestone often sits close to the surface here, and when we hit it we work around or through it instead of pouring over a thin layer of loose fill on top of rock.

How much does a concrete slab cost?

It comes down to size, site prep, footing depth, reinforcement and finish. A slab on a flat lot that is ready to go costs less than one on a slope that needs fill, rock work or a stepped footing. We price each slab from a site visit and put the quote in writing at no charge.

Do I need a permit for a shop or garage slab?

Usually yes, when the slab is the foundation for a building. Spring Hill, Franklin, Columbia, Williamson County and Maury County each have their own requirements, and some want a footing inspection before the pour. We pull the permit, schedule the inspections and keep you posted so the job does not stall.

Ready to start your Murfreesboro slab project?

Free quotes. Call or fill out the form.